Product Guide for Kobelt Brake Discs

Medium & Heavy Duty Brake Discs

BrakeTechnique®, Inc. Products

These brake discs were designed to go with our die cast brake calipers. They are suitable for both fluid applied brakes and spring applied brakes. All the brake discs are ventilated and can be used for medium to heavy-duty applications. Normally they are cast in ductile iron… however other materials are available to suit the customer’s specific requirements.

Catalog Section

Maintenance & Installation Instructions for all Kobelt Disc Brakes


High Energy Input Brake Discs

BrakeTechnique®, Inc. Products

These brake discs were developed for use with medium to high energy input calipers. The patented fin design offers ultimate heat transfer and air flow. This disc will accomplish tasks not possible with ordinary ventilated discs.

Catalog Section

Maintenance & Installation Instructions for all Kobelt Disc Brakes

Product Guide for Low Inertia Clutches & Brakes

WPT® Low Inertia High Torque clutches and Spring Set brakes range from 4″ through 60″ diameter. Designed for metal forming equipment, stamping equipment and general power transmission applications. From 2,340 lb-in (260 Nm) through 11,430,000 lb-in (1,301,800 Nm) static torque.

Low Inertia Clutches & Brakes


High Torque Clutches


Spring Set Brakes


Units with Metric Mounting Dimensions


Air Accessories, Typical Hose Arrangements and Air Rotating Unions

Product Guide for Mechanical Power Take-Off Clutches

WPT®’s mechanical PTO clutches are suitable for inline & side-load applications on all internal combustion engines with standard SAE flywheel housing dimensions. All PTOs & parts are 100% interchangeable with existing PTOs. All units are supplied with sealed pilot bearings to eliminate lubrication problems normally encountered. Ball bearing throw-out collars are optional on 14″ units and standard on 311 units.

Mechanical Power Take-off Clutches


13″ Power Take-off Clutches

Product Guide for Pneumatic & Hydraulic Power Take-Off Clutches

WPT® hydraulic or pneumatic heavy duty Power Take-Off Clutches are ideal for use in engine driven equipment such as pumps, wood-chippers, recycling shredders, dredges, road planers and rock crushers.

Type 1 Power Take-off Clutches

BrakeTechnique®, Inc. Products

Type 1 PTOs are best suited for engine drives on rock crushers, dredge pumps, oilfield mud pumps, waste shredders and other high horsepower applications.

Catalog Section

Installation & Operation Manual


Type 2 Power Take-off Clutches

BrakeTechnique®, Inc. Products

Type 2 PTOs are best suited for medium to high side loads. Typical applications include engine driven pumps for irrigation, fire control, high pressure spray as well as road planers, wood chippers and utility construction equipment.

Catalog Section

Installation & Operation Manual


Power Grip High Speed Clutches

BrakeTechnique®, Inc. Products

Power Grip High Speed Clutches are designed to withstand severe applications mounted to internal combustion engines.

Catalog Section


Maximum Horsepower Ratings

Product Guide for Power Grip & Power Grip PO Clutches

The WPT® Power Grip Clutch is designed to accommodate in-line mounting for heavy duty power transmission. Used with a quick change or standard driving adapter, the Power Grip Clutch is useful as a coupling clutch for shaft to shaft applications.

Power Grip Clutches


Power Grip PO Clutches


Power Grip High Speed Clutches

BrakeTechnique®, Inc. Products

Power Grip High Speed Clutches are designed to withstand severe applications mounted to internal combustion engines. The drive rings will fit standard SAE industrial flywheels. Heavy duty laminated gear teeth friction discs are designed to withstand heavy shock loads and torsional vibrations.

Catalog Section


Air Accessories, Typical Hose Arrangements and Air Rotating Unions